51308363-175  CC-TAIX01 | Analog Input Module

Moore Automation

Sales Manager:Jessica 

Email:sales*mvme.cn (please change * to @)

Skype:jessica01235483 

The HPF602ULADA has a Form C trouble relay built into Terminals 11-13. The relay provides a normally open and a normally closed contact, both of which are rated at 2.5A. The trouble relay will deactivate under any trouble condition. 

A typical application of the trouble relay is to connect the HPF602ULADA normally closed (N.C.) contacts in series with the EOL supplied with the fire alarm control panel. This will cause a trouble on the fire alarm control panel when the HPF602ULADA opens its trouble contacts.

The configuration shown in Figure 4-4 shows Class A supervised wiring from a fire alarm control panel to the HPF602ULADA board. 

Pay close attention to the polarities when wiring a panel to the HPF602ULADA and follow these requirements: 

• When wiring to Terminal 18 on the HPF602ULADA, you must use two separate wires. Do not loop a single wire or twist two conductors together. 

• Do not use notification appliances on Class A circuits connected to a HPF602ULADA for input.

260491

260491+260590

452752+452753

IN91161/5

IN91161/4

211QS50328C

211QS50328C+211QS50005B

IN91161/5

IN91161/6

IN91221/1

IN95111/1+IN95201/2

IN93051/2

IN93051/2+IN95201/1

IN95191-1

IN91221/2

IN93062/1

IN95111/1

SPDM110RGE

211QS50412B 

We are looking forword to your inquiry. 

All products we sell are 100% New original Package in good condition and will be examed before they are shipped.