FC-SDO-0824 SDO-0824 V1.3 | Honeywell | Digital Output Module

Contact person:Jessica

WhatsApp: +8618030235311

Phone: +8618030235311

E-mail: sales*mvme.cn (please change * to @)

Skype: jessica01235483

Wechat: hu18030235311

There are two ways of mounting the product in cabinets, open rack or other types of installations; aluminum profile with mounted DIN-rail or DIN-rail mounted on a metal sheet of proper size. The aluminum profile or metal sheet shall be properly connected to protective earth.

DIN-rail type with height 7.5 mm shall be used. Refer to type NS 35/7.5 according to standard EN50022.

The interference suppression for external signals, are normally directly grounded to chassis and/or plant ground. The plant ground potential must be stable and well defined, even in the event of a low ground fault caused by high voltage equipment or a lightning strike.

Each module's conductive back plane connects to the metallic DIN-rail which serves as the module electronics ground conductor between the interconnected devices.

This is to ensure a good ground connection both for the internal logic and for the EMI immunity and RF emission of the modules. The DIN mounting rail must have a good bond to the PE of the cabinet.

EASY721-DC-TC

ETR4-11-A

819-DC-RCX

618-DC-RE

PS4-151-MM1

PS416-BGT-410

SN4-050-BI7

PKZM0-16

PKZM0-4

INP-400

CNT-200

NET-440

POW-400

EBE-223.2-2 CPU-W

PS316.118-3

EBE201

EBE295.1-3

PS306-DC

PS416-BGT-420

PS416-MEM-442

EBE-252-1

PS3-DC

PS416-CPU-400

EASY205-ASI

Are you looking for a suitable sustainable partner to ensure your industrial electronics run smoothly or in the event of a failure?

If so, then Moore Automation is your best choice.