TRICONEX 2361 | Power Module Module

Moore Automation

Sales Manager:Jessica 

Email:sales*mvme.cn (please change * to @)

Skype:jessica01235483 

DO Modules include complete, ongoing diagnostics for each channel. If the diagnostics detect a failure on any channel, the Fault indicator turns on and activates the system alarm. The Fault indicator identifies a channel fault, not a complete module failure. 

DO Modules are guaranteed to operate properly in the presence of a single fault and may continue to operate properly with certain multiple faults. DO Modules support a hot-spare module. Each DO Module is mechanically keyed to prevent improper installation in a configured baseplate.

These baseplates can be used with the Model 3401 DO Module: 

• Model 2401, which is used with typical applications. 

• Model 2401L, which is used with low-current applications where integral current limiting is required. Each output is provided with a 180 ohm series resistor

Each TMR Pulse Input Module has three isolated sets of electronics, called channels, which independently receive voltage transitions from each point and converts the transitions to frequency (RPM) data. 

Each channel places the processed data in an array and transmits the array, on request, to the MP associated with that channel. The MPs vote the data before passing it to the application

AH466704U001

AH470280U004/AH470280T004

AH389188U003

AH389188U002

AH466407U001

AH470330T031

AH470330T021/2

AH248716 U200

AH248716 U100

AH385356U001

591P40A-165A

AD102725

AD102460

AH385851U003

AH385870U001

AH465315U001

AH386001U001

AH385851U002