TRICONEX 3482 | Digital Output Module

Contact: Jessica

Moore Automation

Tel / Whatsapp:+8618030235311

Wechat: hu18030235311

E-mail: sales*mvme.cn (please change * to @)

The main components on an I/O Extender Module are: 

• Two 24-volt logic power input terminal blocks, each with fuse and blown-fuse indicators 

• A protective earth (safety ground) terminal 

• Three DB-9-pin I/O bus connectors, one per channel 

In a typical Trident system, a maximum of eight baseplates may be connected end-to-end in an I/O column. To extend a system beyond eight baseplates or to distribute the baseplates into multiple I/O columns, I/O Extender Modules and I/O Bus Cables are used, as shown on the figure at the right.

An I/O bus cable is required for each TMR channel and is terminated at each end by a male DB-9-pin connector. Various cable lengths are available. 

If the I/O bus is longer than 20 feet (6 meters), the bus should be terminated by adding an I/O Bus Terminator Kit to both open ends of the system. The maximum allowable I/O bus length is 650 feet (200 meters).

Trident baseplates within a single I/O column are connected by Interconnect Assemblies that carry I/O messages and logic power across the baseplates. 

The MP Interconnect is connected to an I/O baseplate, and the I/O Interconnects are connected to other I/O Baseplates.

CPM1A-40CDR-A-V1

SE-K4TN

CQM1-ID211

C200HW-PA204

CS1W-SCB41

C200H-PID03

C200H-AD002

C200H-LK201-V1

C200H-OC224

CQM1-OC221

CPM1A-40EDT

C200H-OD215

C500-CPU11-V1 /3G2C3-CPU11-V1

C200H-OC221

F180-C10

C500-SP001 /3G2A5-SP001

C200H-IA222

F180-C10

C200H-MD215

CQM1-PA203